PLA or PETG: which filament should you choose?
Our two materials cost the same: €8.99 per 1 kg spool. So the choice depends only on what you want to print.
In short
- PLA: the easiest to print. For beginners, decoration, models, prototypes and everyday parts.
- PETG: withstands impact and heat better. For functional parts and outdoor use.
Comparison
| Criterion | PLA | PETG |
|---|---|---|
| Ease of printing | Very easy, ideal for beginners | A little more demanding on settings |
| Nozzle | 225 °C | 245 °C |
| Bed | 50 to 60 °C | 70 to 85 °C |
| Cooling fan | 100% after the first layer | 30 to 50% |
| Speed | Up to 300 mm/s | Up to 300 mm/s |
| Impact resistance | Stiff, but more brittle | Better |
| Heat resistance | Limited: avoid direct sun or a car interior | Better than PLA |
| Outdoor use | Best kept indoors | Suitable |
| Storage | Dry | Dry, more sensitive to moisture |
| Colours | 16 | 16 |
| Price | €8.99 per kg | €8.99 per kg |
When to choose PLA
Choose PLA if you are starting out, or for decorative objects, models, prototypes and indoor parts. It shrinks little and prints without an enclosure.
When to choose PETG
Choose PETG for a part that has to take loads or knocks, stay outdoors or stand more heat: brackets, fixings, mechanical parts.